Strength, Beauty & a Low Cost Design
Manufactured using the latest in high-end 3D printing technologies, this Fixed Cone Table mount is a truly revolutionary design. Its silky smooth finish blends into any environment, while securing your tablet with basic theft-resistance!
iPad / Android Tablet Enclosure
Our VidaMount VESA Tablet Enclosures are engineered like no other enclosure on the market today. With attention to details like a mic hole, speaker grill, interior pads for tablet protection, and a power button service knockout. Our enclosure fully wraps your iPad or Android tablet for ultimate protection and theft prevention.
Learn more...
US Patent No. 20220205284
Learn more...
US Patent No. 20220205284
A Magnificent Combination
The VidaMount Fixed Surface Lite iPad / Android Tablet Display is a pinnacle of VidaBox ingenuity. This is a secure tablet kiosk that is perfect for Point-of-sale (PoS) setups, retail display environments, client sign-ins, trade show exhibitions, or even public events. It's sturdy, easy to install, table mountable design means you can quickly add a tablet kiosk onto any existing desk or table top. The roomy inner chamber allows for hiding all cables and wiring. The magnificent PLA-based mount is designed and manufactured right here in Long Island, New York.
Hide Cables, Adapters, & More!
The Fixed Cone Table mount allows you to run USB cables thru the table, or allow them to exit towards the rear cable exit hole. With its fully hollow center, you can also easily hide PoE or other connectivity adapters inside!
Installation is a Snap - Literally!
Just follows these steps:
[1] Secure the circular mounting plate with four screws
[2] Align the main cone piece with a small offset
[3] Rotate it counterclockwise to snap in place!
To disassemble, insert the included security key, and un-twist it clockwise to remove in seconds!
[1] Secure the circular mounting plate with four screws
[2] Align the main cone piece with a small offset
[3] Rotate it counterclockwise to snap in place!
To disassemble, insert the included security key, and un-twist it clockwise to remove in seconds!
Secure by Design
Be 100% confident that your device is displayed securely! Stand can only be removed after following these specific steps:
[A] Insert & press the included tool into the Spring Release Hole
[B] Rotate the piece counter-clockwise
[C] Twist and lift upwards.
[A] Insert & press the included tool into the Spring Release Hole
[B] Rotate the piece counter-clockwise
[C] Twist and lift upwards.
Built in Cable Channels
Need to run cables back into the Cone's center, no problem! Pre-milled wire grooves allow you to quickly route any cable back into the Cone's hollow core for cable management!
Made of Light-Weight, Durable, Compostable PLA Polymers
With an eye towards sustainability, it's produced from renewable raw materials - not based on fossil raw materials. At under 0.3kg, this design is about half the cost and density of a similar, aluminum design. Gets the job done at a great value!
VESA 100x100 Standard
w. Optional 75x75 Adapter
w. Optional 75x75 Adapter
The Fixed Cone Table mount ships with a preassembled VESA 100x100 mounting plate, but can support VESA 75x75 with an optional adapter: [Contact Us for More Info]
Pound-for-Pound:
(Almost) As Strong As Aluminum!
(Almost) As Strong As Aluminum!
Don't be fooled by its ultra-light weight! Even though this PLA-based design is less than half as dense a aluminum (1.3 vs 2.7 g/cm³), its strength to weight is comparable to aluminum!
Cable Management
We thought of everything, from fitting your Lightning or USB power cables, to a perfectly sized opening for your 3.5mm headphone jack and cord (including some add-on credit card readers). Our enclosure was designed to fit your needs.
Fits Microsoft Surface Dock
Charge your Microsoft Surface Tablet with either the official Microsoft charger, or use the Surface Dock peripheral to add-on wired Gigabit LAN, audio out, USB, & Displayport. Either connector and its wiring is hidden perfectly inside the VidaMount, then route the wires out of the enclosure's back for a clean, neat look.
Power Button Access
Our unique enclosure design provides a choice between open or limited power button access. As shipped, the enclosure covers the power button - removing the ability for a user's finger to access the tablet's power button. A tiny thru hole still provides the ability to actuate the power button using a paper clip or other tool. Alternatively - for free, unfettered power button access, the cover is removable as needed!
Keep the Tablet Charged!
With our PoE charging solution (components sold separately), you can keep your tablet your plugged in and charging 24/7!
Locate a wall outlet [1] up to 330' (100m) away. Plug in our VidaPower® PoE++ Injector [Option A] or our VidaPower® PoE++ Switch [Option B] to the outlet, and [2] connect a standard CAT/Ethernet cable to the appropriate port.
Next, run the powered PoE/CAT5/5e/6 cable to your tablet location [3] and connect it to the 48V VidaPower® DataCharger™ [International Only] or 48V VidaCharger™ Ultra [USA Only].
Finally, plug your VidaPower® High-Wattage USB-C Charging Cables to the USB-C port of the Adapter, connect your charging cable to your device [4] - and voila - we've connected wired power / data ! You're good!
Locate a wall outlet [1] up to 330' (100m) away. Plug in our VidaPower® PoE++ Injector [Option A] or our VidaPower® PoE++ Switch [Option B] to the outlet, and [2] connect a standard CAT/Ethernet cable to the appropriate port.
Next, run the powered PoE/CAT5/5e/6 cable to your tablet location [3] and connect it to the 48V VidaPower® DataCharger™ [International Only] or 48V VidaCharger™ Ultra [USA Only].
Finally, plug your VidaPower® High-Wattage USB-C Charging Cables to the USB-C port of the Adapter, connect your charging cable to your device [4] - and voila - we've connected wired power / data ! You're good!
ADA Compliant Design
This VidaMount design meets ADA compliance:
For wall-mounting:
· Maximum protrusion from wall of 4" or less
· Height between 27" to 80" high
For free-standing, forward reaching setups:
· Unobstructed touch access between 15" to 48" high
· Obstructed (>20") touch access between 15" to 44" high
For free-standing, side reaching touchpanels:
· Unobstructed touch access between 34" to 48" high
· Obstructed (<24"/>10") touch access between 34" to 46" high
For wall-mounting:
· Maximum protrusion from wall of 4" or less
· Height between 27" to 80" high
For free-standing, forward reaching setups:
· Unobstructed touch access between 15" to 48" high
· Obstructed (>20") touch access between 15" to 44" high
For free-standing, side reaching touchpanels:
· Unobstructed touch access between 34" to 48" high
· Obstructed (<24"/>10") touch access between 34" to 46" high
Portrait or Landscape
Sometimes, certain apps such as meeting room scheduling or reservation software are locked to a landscape orientation. Maybe the time card or "check in" app we're using is designed for a portrait view. No worries! Our iPad Tablet VESA enclosures can be mounted to its VESA bracket in either a portrait or landscape orientation.
Optional Security Screw Kit
Our tamper-proof screw kit helps keep your tablet set up safe and secure, by changing the screws on the enclosure from Phillips to tamper-proof heads.
Customize It!
From company logos to fancy wood finishes, or glossy highlights to embossing - our durable customizations help blend any enclosure into your home or office, or enhance branding for your business. Add this affordable option to truly make these enclosures your own! Click here to learn how to customize your own unique enclosure! (Minimums apply. Ideal for projects with 100+ enclosures - Contact Us for details!)
Wide Tablet Support
We have developed VESA enclosures for many of the most popular tablet models, including:
- iPad Pro 12.9-inch (4th, 5th & 6th Gen)
- iPad Pro 12.9-inch (3rd Gen)
- iPad Pro 12.9-inch (1st & 2nd Gen)
- iPad Pro 11-inch (2nd, 3rd & 4th Gen) & Air 10.9 (4th & 5th Gen)
- iPad Pro 10.5-inch & Air 10.5 (3rd Gen)
- iPad 10.2-inch (7th, 8th & 9th Gen)
- iPad 9.7-inch (5th & 6th Gen), Air 1 & 2, Pro 9.7-inch
- iPad Mini (6th Gen)
- iPad Mini 4 & 5
- iPad Mini 1, 2 & 3
- iPad 2, 3, & 4
- Samsung Galaxy Tab S5e 10.5
- Samsung Galaxy Tab A8 10.5 (2022)
- Samsung Galaxy Tab A 10.5
- Samsung Galaxy Tab A7 10.4
- Samsung Galaxy Tab A 10.1 (2019)
- Samsung Galaxy Tab A 10.1 (2016)
- Samsung Galaxy Tab A 9.7
- Samsung Galaxy Tab A7 8.7
- Samsung Galaxy Tab A 8.0 (2019)
- Samsung Galaxy Tab A 8.0 (2017)
- Samsung Galaxy Tab A 8.0 (2015)
- Samsung Galaxy Tab A 7.0
- Samsung Galaxy Tab E 9.6
- Samsung Galaxy Tab E 8.0
- Microsoft Surface Pro 4, 5, 6, 7 & 7+
- Microsoft Surface Pro 8 & Pro X
- Microsoft Surface Pro 9
- Microsoft Surface Go & Go 2
- Microsoft Surface 3
- HP Stream 7
Don't see your tablet model? Contact us and let us know what you need.
Dimensions Fixed Surface Mount Lite
