Strength, Beauty & Affordability
Manufactured using the latest in high-end additive manufacturing [3D printing] technologies, our Fixed Surface Lite VESA mount is a truly revolutionary design. Its silky smooth finish blends into any environment, while securing your tablet with basic theft-resistance!
Hide Cables, Adapters, & More!
Our Fixed Surface Lite VESA mount allows you to run USB cables thru the table, or with its fully hollow center, you can also easily hide Power-over-Ethernet (PoE) or other connectivity adapters inside its hollow cone shape!
Installation is a Snap - Literally!
Just follows these steps:
[1] Secure the circular mounting plate with four screws
[2] Align the main cone piece with a small offset
[3] Rotate it clockwise to snap in place!
To disassemble, insert the included security key, and un-twist it counter-clockwise to remove in seconds!
[1] Secure the circular mounting plate with four screws
[2] Align the main cone piece with a small offset
[3] Rotate it clockwise to snap in place!
To disassemble, insert the included security key, and un-twist it counter-clockwise to remove in seconds!
Secure by Design
Be 100% confident that your device is displayed securely! Stand can only be removed after following these specific steps:
[A] Insert & press the included tool into the Spring Release Hole
[B] Rotate the piece counter-clockwise
[C] Twist and lift upwards.
[A] Insert & press the included tool into the Spring Release Hole
[B] Rotate the piece counter-clockwise
[C] Twist and lift upwards.
Built in Cable Channels
Need to run cables back into this Lite Mount's center? No problem! Pre-milled wire grooves allow you to quickly route any cable back into the cone shape's hollow core for cable management!
Made of Light-Weight, Durable, Compostable PLA Polymers
With an eye towards sustainability, it's produced from renewable raw materials (not fossil fuel-based materials)! At under 0.3kg, this design is about half the cost and density of a similar, aluminum design. Get the job done at a great value!
VESA 100x100 Standard
w. Optional 75x75 Adapter
w. Optional 75x75 Adapter
The Fixed Surface Lite Mount ships with a preassembled VESA 100x100 mounting plate, but can support VESA 75x75 with an optional adapter: [Contact Us for More Info]
Pound-for-Pound:
(Almost) As Strong As Aluminum!
(Almost) As Strong As Aluminum!
Don't be fooled by its ultra-light weight! Even though this PLA-based design is less than half as dense a aluminum (1.3 vs 2.7 g/cm3), its strength to weight is comparable to aluminum!
Dimensions Fixed Surface Mount Lite
What's in the box
Fixed Surface VESA Mount Lite
Circular Retainer Piece
(4) M4 x 16mm Countersink Flat Head Screws
(4) M5 x 30mm Phillips Head Wood Screws (Bolts for Mounting)
(1) L-Shaped Allen Key
Fixed Surface VESA Mount Lite Installation Instructions [Download]
