Plug-N-Play Installation
Just plug in your PoE cable from our VidaPower Ultra Injector, then your USB-C cable - & that's it! No configuration required!
Solid, Sturdy Metal Construction
VidaCharger Ultra features a rugged metal case, making the part extremely durable, while acting as a heatsink!
Up to 50W of USB-C Power
Enjoy reliable, steady charging power for your iPad Pro, or other USB-C tablet / device!
Perfectly Pairs with
VidaPower USB-C Cables
VidaPower USB-C Cables
[Optional] Ideal w. our right-angle USB-C cables for the perfect fit inside of any VidaMount on-wall or VESA tablet enclosure!
Works w. CAT5/5e/6 or
Thick Gauge Speaker Wires
Thick Gauge Speaker Wires
Need high-power USB-C charging, but only have speaker or 2-conductor wires? It'll work if wires are <5 Ohms resistance!
Data-Pass Through via RJ45
VidaCharger Ultra provides Ethernet data through the separate RJ45 port. The USB-C connection is for power only, and DOES NOT provide data.
Option 1: 48V VidaPower Ultra Injector
Be sure to kit this item with the 48V VidaPower Ultra Injector, designed for 24/7/365 usage w. high power output!
Option 2: 802.3at/bt PoE Injector/Switch
Alternatively, our VidaCharger can work with any 802.3at/bt PoE switch that supports more than 50W output. Warning: Most PoE switches only have (1) 802.3at/bt port - be sure to check your PoE switch's specifications!
Not Compatible w. Standard PoE
Warning: Never use this device with a regular / standard PoE switch (limited to 15W).
(Your power source will overload!)
(Your power source will overload!)
Step by Step - With CAT5/5e/6
Locate the nearest wall outlet (120-240V A/C) to your tablet mounting location. Plug in our VidaPower Ultra Injector to the outlet, and connect a standard CAT/Ethernet cable to the appropriate port. Next, run the powered cable to your tablet location (Supports up to 375' [115m] w. CAT5/5e/6) and connect it to the VidaCharger Ultra.
Finally, connect the USB-C cable into the VidaCharger Ultra Adapter, then run your charging cable to your device and voila - we've connected your device to an A/C outlet up to 330' away! You're good!
Finally, connect the USB-C cable into the VidaCharger Ultra Adapter, then run your charging cable to your device and voila - we've connected your device to an A/C outlet up to 330' away! You're good!
Designed in the USA
We design and engineer these pieces right here in Long Island, New York. We know your tablet setup / project incorporates hundreds or even thousands of dollars in time, software and hardware - so we thought it would be best to design and engineer the best protection for your display...right here in the USA!
Dimensions
* Device accepts 48V PoE Ultra / 802.3bt CAT5/PoE power only, and outputs USB-C power ONLY. Does NOT provide Ethernet via the USB-C connection
Power Requirements
Wiring Requirements
CAT5/5e/6 Ethernet Cable, or
Speaker Wire, or
Any 2-conductor Wire
