Open, Slim & Sleek Design
OpenVESA™, our ultra-thin design for setups that want to show off a tablet securely, with minimal compromises to security. Blends into any environment with black or white choices for a perfect fit!
Secure and Theft-Deterrent
An open, slim-line design doesn't mean non-secure! Once installed, the tablet is NOT REMOVABLE unless someone has the right screw bits or drivers. Installing into a public location? No problem! Consider our Security Screw upgrade - making it impossible to disassemble with a standard Leatherman or pocket screwdriver - perfect for discouraging opportunistic thieves!
Complete Button,
Port & Camera Access
Port & Camera Access
Have a headphone jack or other I/O port on your tablet that we need to connect into? Need complete access to both the front and back cameras? Be our guest! The OpenVESA™'s unique design allows the tablet to stay affixed and secure, while allowing easy, open access to every feature!
Open Speaker & Mic for Great Sound
All audio input and output ports are fully exposed to ambient, allowing perfect sound for teleconference apps - where audio clarity is key!
Beautifully Manufactured
While most 3D printed designs are typically flawed - VidaBox has perfected higher-quality outputs thru painstaking, careful Research & Development. Expect 99.9% perfectly textured back plates & clean, beveled edges - just like what's shown in the pictures!
VESA 100x100 Compatible
Our OpenVESA™ enclosure is compatible with any standard VESA 100 pattern! Mounts onto any wall, desk, table top, or surface mount and VESA compatible floor stands!
Includes Hidden USB-C Ribbon Cable
Easily provide power & data to your installed tablet with the included USB-C Ribbon Cable, designed to neatly hide inside of the OPENVESA enclosure. The male end connects to your tablet, with the female end ready to connect to your power/data source. [Connects to / requires a USB-C 3.1 or higher spec cable. Not compatible with USB-C 2.0 cables]
Portrait or Landscape
Sometimes, certain apps such as meeting room scheduling or reservation software are locked to a landscape orientation. Maybe the time card or "check in" app we're using is designed for a portrait view. No worries! Our VidaMount OpenVESA™ iPad / Tablet Enclosure can be mounted to its VESA bracket in either a portrait or landscape orientation.
Add Optional USB Extension Cable
Every OpenVESA™ enclosure includes a 12 in (30 cm) male-to-female ribbon cable, enabling power and data connectivity by plugging in another Male-to-Male USB 3.0 cable to a nearby DataCharger®, VidaCharger®, or other power source.
If the combined length of the ribbon cable and USB 3.0 cable is too short to reach the USB-C port, optional extension cables of up to 8.8 ft (2.7 m) are available - supporting total cable lengths of 10 ft [3m] - or beyond - for nearly any installation. [Not included / Sold separately]
If the combined length of the ribbon cable and USB 3.0 cable is too short to reach the USB-C port, optional extension cables of up to 8.8 ft (2.7 m) are available - supporting total cable lengths of 10 ft [3m] - or beyond - for nearly any installation. [Not included / Sold separately]
Keep the Tablet Charged!
With our PoE charging solution (components sold separately), you can keep your tablet your plugged in and charging 24/7!
Locate a wall outlet [1] up to 330' (100m) away. Plug in our VidaPower® PoE++ Injector [Option A] or our VidaPower® PoE++ Switch [Option B] to the outlet, and [2] connect a standard CAT/Ethernet cable to the appropriate port.
Next, run the powered PoE/CAT5/5e/6 cable to your tablet location [3] and connect it to the 48V VidaPower® DataCharger™ [International Only] or 48V VidaCharger™ Ultra [USA Only].
Finally, plug your VidaPower® High-Wattage USB-C Charging Cables to the USB-C port of the Adapter, connect your charging cable to your device [4] - and voila - we've connected wired power / data ! You're good!
Locate a wall outlet [1] up to 330' (100m) away. Plug in our VidaPower® PoE++ Injector [Option A] or our VidaPower® PoE++ Switch [Option B] to the outlet, and [2] connect a standard CAT/Ethernet cable to the appropriate port.
Next, run the powered PoE/CAT5/5e/6 cable to your tablet location [3] and connect it to the 48V VidaPower® DataCharger™ [International Only] or 48V VidaCharger™ Ultra [USA Only].
Finally, plug your VidaPower® High-Wattage USB-C Charging Cables to the USB-C port of the Adapter, connect your charging cable to your device [4] - and voila - we've connected wired power / data ! You're good!
Customize It!
Do you need a design with certain buttons (power / volume) or ports COVERED? Or, do you need a design that exposes the USB power port for a specialty setup? Contact us for a custom quote! [Minimum quantities apply] Contact Us for details!)
Manufactured in the USA
We design, engineer, and manufacture the right here in Long Island, New York. We know your tablet setup / project incorporates hundreds or even thousands of dollars in time, software and hardware - so we thought it would be best to build the best protection for your display...right here in the USA!
Materials
OpenVESA™ Enclosure: PLA Polymers
What's in the box
VidaMount OpenVESA™ Tablet Enclosure
(2) 18-8 Stainless Steel Phillips Flat Head Screws
(1) VidaPower® High-Wattage, USB-C Ribbon Cable - 12-in (300mm)
Installation instructions [Download]
Requirements
VESA 100 Bracket, for mounting
CAD Model
3D STEP file [Download]
