vAutomation™ Lighting Controls

UPB Standard Wall Dimmer (WS1D)

- Various power ratings
- 600W, 1000W, 1500W, 2400W
- Available in: White, almond, ivory,
  brown, black and grey

UPB Low Voltage Dimmer (WS1E)

- Controls electronic low voltage AC
- 300VA, 500VA
- Available in: White, almond, ivory,
  brown, black and grey

UPB Auxiliary Remote (RWS-S)

- Designed for 3 or multi-way control
- Up to 1000' wiring range
- Works with WS1 Wall Switch/Dimmers

Dual Channel Lamp Module (LM2-8)

- UPB dimmer perfect for bedrooms
- 800W max. power between 2 channels
- Can be used as straight on/off switch

UPB Lamp Module – Dimmer (LM1-4)

- Ideal for one or more 120V lamps
- 400W max. power
- Can be used as straight on/off switch

UPB Appliance Module (AM1-12)

- Ideal for 1-2 non-dimming appliances
- Supports up to 12 amps
- Has pass-through outlet

UPB Output Control Module (OCM)

- 2 Isolated relay contact channels
- Class 2 contacts @ 8 amps each
- Ideal for motors, & contact
  closure equipment.

UPB 2 Channel Fixture Dimmer
(FMD-2-4)

- Ideal for individually controlled lights
- Perfect for ceiling fans & light combos
- 400W max. power out total

UPB Fixture Module – Relay (FMR1)

- Single channel relay load controller
- Ideal for non-dimming loads
- Rated for 20A

6-Button Keypad UPB Controller
Wall Mount (KPCW-6)

- Control individual lights or scenes
- Tap, double-tap, held, released states
- Available in: White, almond, ivory,
  brown, black and grey

8-Button Keypad UPB Controller
Wall Mount (KPCW-8)

- Control individual lights or scenes
- Tap, double-tap, held, released states
- Available in: White, almond, ivory,
  brown, black and grey

6-Button Desk Keypad UPB Controller
(KPCD-6)

- Control individual lights or scenes
- Tap, double-tap, held, released states
- 120VAC plug-in desktop device

8-Button Desk Keypad UPB Controller
(KPCD-8)

- Control individual lights or scenes
- Tap, double-tap, held, released states
- 120VAC plug-in desktop device

UPB Powerline Interface Module
(PIM-R, PIM-U)

- Interfaces vController to UPB system
- Plugs into any 120VAC outlet

UPB Input Control Module (ICM)

- Control off-the-shelf low voltage or
  contact closure sensor devices
- 2 channels of general purpose isolated contact closure sensing inputs

Doorbell Ring Interface Module (DBM)

- Senses doorbell power current
- Sends out readings to vController
- Triggers pre-programmed scenes

Telephone Ring Interface Module (TCM)

- Senses phone line power current
- Sends out readings to vController
- Triggers pre-programmed scenes

Split Phase Repeater
(SPR-1, SPR-3, SPR-4)

- Enhance the communication reliability
- Ideal for 120/240VAC split-phase
  environments
- Wire-in & Plug-in models available

Passive Phase Coupler
(PPC-1, PPC-3, PPC-4)

- Couples UPB communication signals
  generated on one phase of the
  powerline onto the other phase

Powerline Filter – 3.8 Amps (PLF-5)

- Line filter for devices using 3.8A or less
- Ideal for electrically noisy devices
- Filters single device

Powerline Filter – 15 Amps (PLF-5)

- Line filter for devices using 15A or less
- Ideal for electrically noisy devices
- Filters single device

In-Line Choke Filter (ILC)

- Wire-in device
- Isolates powerlines from
  electrically noisy devices
- Filters single device