|HS / Harmonized Code||8544.42.9000|
|Input Connector||HDMI 1.4a Female|
|Video Output||Single-link 225Mhz, 2k, WUXGA, 1080p60/12bit deep color and x.v.color
Bandwidth : 2.25 Gbps
|Audio Output||Passthrough fpr PCM, Dolby Digital, DTS, Dolby True HD, & DTS Master Audio / HD|
|Audio File Formats||No|
|HD Audio Support||No|
|Voltage Input (V)||5V via included Mini USB-B female connector cable
Power is optional - recommended, but not required
|Supported Distance||Up to 160feet [50m] cable loss compensation|
|Length||2.25" [57mm] (Main unit only, no cables)|
|Width||1.5" [38mm] (Main unit only, no cables)|
|Height||0.6" [15mm] (Main unit only, no cables)|
|Weight||0.06 lb [28g]|
|Package Length||9.5" [240mm]|
|Package Width||6.75" [170mm]|
|Package Height||1.75" [44mm]|
|Package Weight||0.25 lb [127g]|
· Input cable equalization
· Support extended EDID CEA861, 256 byte
· HDCP Pass-Through
· Lip Sync Pass-Through
· CEC Protocol Pass-Through
· Compliance: HDCP/FCC/CE
Why use Dr. HDMI?
Dr. HDMI helps resolve most HDMI video issues caused by faulty EDID handshakes or other incompatibility issues. It's used to keep a source device "always on" by tricking / feeding back to it the same, stable EDID signal, and is particularly useful for systems integrators. Are you experiencing resolving video loss / video return delays when a TV displays is turned on/off, or when an AV receiver or matrix switcher's inputs/outputs are changed? Dr. HDMI is the answer!
Dr. HDMI - Feature Highlights
Locks and presents a fixed EDID to a connected video sourceBy presenting a fixed, never-changing EDID to a video source, video output is always present. Say goodbye to common video loss issues, and lengthy delays for the video signal to come back
Preloaded with (5) EDID defaults for fast setupUse one of the 5 preloaded EDIDs (1080p 3D, 1080p 2D, 1080i, 720p, 480/576p), and you'll be ready to go in seconds! Most setups can use the standard defaults without any issue.
1-Click EDID learning - no silly power plugs to connect or need to use dip-switches!Can't use one of the defaults, or prefer to load in the actual setup's EDID? No problem - just set the unit to EDID Bank #8, press the "Learn" button once - and you'll be set in seconds!
Fully HDMI 1.4a and HDCP compliantDr. HDMI is fully HDMI 1.4a compliant, allowing full compatibility with the latest in HD AV technologies. HDCP compliance guarantees signal integrity. (Note: Device DOES NOT resolve non-HDCP compliance - it is NOT an HDCP stripper!)
Full support for 2k, 1920x1200, or 1080p video without losing sync and no quality degradationDr. HDMI is compatible with all of the latest HD resolutions, and will not degrade the incoming HDMI digital signal. Enjoy full HD video, complete with HD surround sound - the way it was meant to be seen & heard!
Helps stablize and extend signal integrityConnect its optional 5V power input, and Dr. HDMI will help maintain the +5V signal needed to stablize digital signal integrity, for up to 50m!
Program custom EDIDs with included USB cableHave a unique situation? Dr. HDMI is fully programmable and can have custom firmware loaded - Click here for a how-to and for more information
Works independently without power, or add power as neededDr. HDMI draws power from a connected source, and does not require a separate power adapter*. Or, connect 5V power via the USB cable as needed to extend signal integrity for longer runs.
Built-in HDMI Pin 14 on/off switch : Fixes HEAC/ARC compatibility issuesHave a HEAC/ARC compatibility issue on your setup? Dr. HDMI takes care of that to - change it from its default setting to fix any HEAC/ARC issues that appear.
* - USB cable is included, and can be plugged into any standard USB port for power. 5V power adapter not included/sold separately.
1. Connect the AV receiver, display, matrix switch input, or other "video sink" into the OUTPUT.
2. Connect the video source into the INPUT.
3. Set the pre-loaded EDID to use, or, learn a new EDID.
4. Set up is complete and ready for use