Why use this HDMI to Component Converter?
This HDMI to component converter allows any HDMI video source to be converted to component in live time, without the bulk and expense of larger video transcoders and scalers. Ideal for use with component matrix switching hardware and existing equipment without HDMI inputs, this converter is HDCP compliant and has built-in EDID banks to properly stablize all handshakes. Every unit is fully tested before shipping, totally eliminating worries or problems with DOAs and faulty units.
HDMI to Component Converter - Feature Highlights
Converts HDMI to Component in real timeSpecifically designed for retrofit equipment, this converter simply and easily converts HDMI video sources into component in real time, without any lip sync / delay issues.
Fast, plug-n-play installation - Pre-tested at factoryEvery unit shipped is tested against an HDMI video source to guarantee no DOAs with a plug-n-play installation! Just connect the cables - you're good to go in seconds!
Fully HDMI, HDCP, and EDID compatibleUnlike low-grade HDMI to component converters, this unit meets full HDCP compliance and has preloaded EDIDs to ensure full compatibility. Setup will be simple and painless - done in seconds!
Recommended: Set all 1080p sources to 1080i or 720p for compatibilityWhile this converter can handily convert all HD resolutions, most displays cannot process 1080p component video correctly. The solution: Set the video sources to either 1080i/720p before set up!
Enjoy Analog or Digital* outputsThis converter also separates the audio signal from HDMI, and converts it to basic L/R analog audio, or makes it available as TOSLink / SPDIF with the optional adapter!
Auto-centering & color depth upscaling for a clean, high quality pictureLow-cost HDMI to Component devices may have the poor video quality, and/or on-screen video misalignments. This converter's built-in auto-centering and color depth upscaling eliminates these issues.
Outputs video in YPbPr, or RGB formatsThis converter is preset to YPbPr for a plug-n-play install, or flip the selectable switch to RGB and transmit video in RGBHV! Adjustable in seconds.**
* - Digital SPDIF optical audio output requires optional 3.5mm to TOSLink adapter, not included with base unit.
** - Requires a DB15 to RGBHV cable, not included with base unit.
|HS / Harmonized Code||8544.42.9000|
|Input Connector||HDMI 1.2 Compliant
Works with HDMI 1.3, 1.4, and above sources
|Video Output||Component via:
- Y-Pb-Pr Outputs
- RGB Outputs
|Audio Output||Choose one:
- Analog via: 3.5mm stereo jack
- Digital via: TOSLink SPDIF output (Optional dapter required)
|Video Upscaling||None. Video resolution output will match the input.|
|Voltage Input (V)||5V (Via optional PSU)|
|Length||3" [76mm] (Main converter, without cables)|
|Width||1.63" [42mm] (Main converter, without cables)|
|Height||.75" [19mm] (Main converter, without cables)|
|Weight||4.1 ounces [116g]|
|Package Length||8.75" [222mm]|
|Package Width||4.3" [109mm]|
|Package Height||2.3" [58mm]|
|Package Weight||12 ounces [340g]|
· Data processor: 11 bit, 200 Mhz· Input: True HDMI
· Auto-image centering: For all modes
· Color depth upscaling: For all modes
· HDCP Compliant: Yes
· EDID settings: 1080p, 1080i, 720p
1. Set the HDMI video source to 1080i, or 720p (recommended). Most TVs CANNOT accept 1080p on component inputs.
2. Connect the HDMI video source to the converter + Connect the included power supply.
3. Connect the Blue, Green, Red outputs into the TV or matrix switching system.
4. The playback sources are ready for use